My DeWALT Bass!

IMG_1120
The Poetry of Sound…
I saw people making cigar box guitars on YouTube. Only one or two tried making a bass. I decided to see if I could make a 2 string fretless bass. I did not have a cigar box, so I decided to use my DeWalt reciprocating saw case. It was good hard plastic and locked down tight. I had a piece of hickory, from a tree behind my house, that I ran through my table saw to make the neck. I took the grinder and ground out the partitions and drilled holes in the top with my door hole saw. I got a cheap piezo stick-on pick-up on amazon. It seems to work well and has a good sound when I hook it up to my small amp. I tuned it to a low C and E on my piano.

These photos show some of the process:

IMG_0959

IMG_0963

IMG_0965

IMG_0991

IMG_0993 (2)

IMG_1103

IMG_1095

IMG_1106

IMG_1109IMG_1117.JPG

Photos: Dwight L. Roth & Ruth Roth

18 thoughts on “My DeWALT Bass!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s